Millions of people experience allergies caused by everyday exposures to agents such as dust mites, cat dander, and pollens.  Workers who encounter agents can also develop allergic reactions such as asthma, nasal and sinus allergies, hives, and even severe anaphylactic reactions.  Work-related asthma, which is caused by exposure to an agent in the workplace, is the most common occupational respiratory disorder in developed countries.  An estimated 15% of asthmatic cases reported in the United States are occupation-related.  In Canada, asthma affects over three million citizens.  Many are not aware that certain agents at their work place could lead to hyper-responsiveness of airway or aggravating pre-existing asthmatic symptoms.  Because of that, it is likely that the cases of occupational related asthma are under reported. 

Asthma is a common lung disease that creates narrowing of the air passages, making it difficult to breathe.  It can affect your ability to work, and your overall quality of life.  When asthma is not managed, it can even threaten your life.  If you are exposed to certain workplace chemicals or agents, you may be at risk for developing occupational asthma.  Many people with work-related asthma don’t realize that their symptoms are related to their work because they are the same as those for regular asthma: attacks of difficult breathing, tightness of the chest, coughing, and wheezing.  In work–related asthma, the symptoms are worse on workdays and improve when the person is away from the workplace, such as on the weekend, days off, and vacation.  Also, symptoms may be more severe at the end of the week, as compared to the beginning of the week. 

Risk factors for occupational asthma include frequent exposure to the agents involved, allergies, family history of allergies, or asthma, and smoking.  A good clinical history will help in identifying the possibility of work-related asthma.  An occupational physician could carry out a walk-through survey in the workplace to identify the possible agents that cause asthmatic attack.  Also, a look at the list of chemicals in Material Safety Data Sheets (MSDS) would give a clue to that. 

There are many agents that can cause occupational asthma.   Here are some examples:

• Certain chemicals;
• Metals and metal-working fluids;
• Dyes, drugs, and enzymes;
• Grains, flours, plants, and gums;
• Natural rubber latex;
• Animal and shellfish proteins;
• Fungi;
• Wood dusts, including red cedar.

Factors that can trigger work-aggravated asthma:

• Vapors, gases, dusts, mists, sprays or fumes from industrial materials and cleaning products;
• Dust mites or mold/fungal spores;
• Indoor air pollution resulting from poor ventilation;
• Outdoor air pollution and smog (for outdoor workers). 

Both employers and employees can help control or prevent work-related asthma.  Employers should:

• Eliminate the asthma-causing agent from the workplace.
• If elimination is not possible, substitute a less hazardous agent.
• Apply administrative controls such as policies, procedures, safe work practices, and job rotation to minimize exposure time of workers.
• Control the exposure.
• Install ventilation systems to contain emissions, such as gases or vapors at the source.
• Provide Personal Protect Equipment, such as respirators.  PPE should not be used as the only method of exposure control when exposures are ongoing.
• Train employees on the proper use, storage and maintenance of PPE, proper handling procedures, avoidance of spills, and safe working and good housekeeping procedures.
• Monitor the exposure level of hazardous agents in the workplace. 

Employees should:

• Learn about the hazards in your workplace by speaking to the employer, health and safety or union representative, or an occupational health professional.
• Be aware of the symptoms of work-related asthma.
• Use PPE that is provided.
• Report any problems with equipment, PPE, or ventilation systems to the supervisor.
• Attend training courses on work-related asthma and occupational health and safety, and participate in all health and safety programs in the workplace. 

If not recognized and treated early enough, work-related asthma is a serious illness that can result in disability and job loss. Fortunately, when potential hazards are recognized, work-related allergies and asthma can often be prevented, or their effects minimized. Employers and employees must work together to prevent work-related asthma, so all can breathe easy at work.

Source: Canadian Centre for Occupational Health and Safety

Share on Facebook

With cold weather, there are many more workers moving indoors, so this is a good time for employers to check the air quality of their employees’ work environment.  This is also the opportunity for employers to inventory their supply and usage of NIOSH-approved respirators.  It is very important to know the hazardous airborne particles that exist in every workplace. 

In the United States, there are an estimated 5 million workers who are required to wear respirators in 1.3 million workplaces.  More people still die from lung cancer than from any other type of cancer (over 159,000 deaths per year).  Smoking is usually found to be the leading cause of lung cancer; however, workers who wear respirators are better protected from harmful airborne hazards.  Some of these hazards have also been known to contribute to causing cancer, lung impairment, other diseases or even death. 

“Dust Masks” vs. N95 Respirators 

Many people often ask what is the difference between a respirator and a dust mask.  Even though their appearances are similar, NIOSH-approved N95 respirators are very different from dust masks.  Dust masks provide no proven protection against harmful airborne particles.  NIOSH recommends the use of N95 (or better) respirators for most environmental hazards. 

In testing, respirators that collect at least 95% of the challenge aerosol are given a 95 rating.  (99% receive a 99 rating; at least 99.97%, a 100 rating).  The filters for respirators are tested by NIOSH at the time of application and periodically afterward to ensure they continue to meet the certification.  The certification of N95 will be on the respirator, so you know you are getting the right thing. 

It is necessary to perform fit tests to verify there are no defects in the respirators.  Please note:  Caution:
Respirators must be properly selected and fitted to provide protection to the user. It is the responsibility of the user to make the appropriate choice of respirator based on the contaminant, workplace concentrations, and any other site specific conditions. It is also the responsibility of the user to ensure that the workplace is in compliance with all applicable Federal, State, and Local regulations on worker safety, including, but not limited to, OSHA regulations on respiratory protection (29 CFR 1910.134). Read all Warnings and Use Instructions that accompany the respirators. If you have any Technical questions regarding respiratory protection, call the manufacturer.

Dust Masks are loose-fitting filters that fit over the nose and mouth, capturing dust on the outside when the wearer breathes in air.  Respirators have the NIOSH marking on them; therefore, they have met strict criteria and passed independent certification tests established by NIOSH.  Their tests ensure the respirator has been designed to meet minimum filtration requirements as well as specific manufacturing quality levels.  NIOSH does not test or certify dust masks. 

Every worksite has its own level of protection that is required for its specific application.  You see respirators used in all types of settings, from the medical industry to industrial applications.  The NIOSH website (www.cdc.gov/niosh) maintains a database of all NIOSH-approved respirators for user reference. 

Source: Gateway Safety; Texas America Safety Company; OSHA

Share on Facebook

The industrial environment is challenged with trying to prevent accidents at the workplace.  Just think how much they must spend on personal protective equipment, training, and if an accident happens – loss of work and productivity, insurance claims, material damage, loss of life, and much time spent writing accident reports.  Because everybody acts of their own free will, sometimes it isn’t easy to get them to follow what you want them to do.  Ironically, those same people are the cause of most accidents!  If your workers don’t obey the rules that you have established, or don’t wear their protective equipment, or don’t practice good safety when they aren’t being supervised, chances are something will probably happen, and it won’t be good!  The key to controlling accidents is safety awareness; this type of safety awareness is critical in any construction site.  One unsafe act can bring your safety record down in a few seconds.

What is a good way to deliver your safety message?

Researchers have found that people remember 50% more in what they see than in what they hear. Promoting safety through visuals is a very effective way to get people’s attention.  Most people enjoy posters that are humorous.  Pleasant thoughts generate more receptive learning.  Using humor drives a point that is so easy to understand when done correctly.  Cartoons can illustrate dangerous situations, which might be impossible to capture on film in real life.

Check out a couple of examples of the safety posters found at tasco-safety.com:

FAILING TO PAY ATTENTION CAN BE A BIG STEP IN THE WRONG DIRECTION seems to be pretty self-explanatory.

The first poster, PPE ONLY WORKS IF YOU WEAR IT – depicts work boots, respirator, earmuffs, hardhat, glasses, earplugs, and gloves, all in one picture.  It reminds employees to wear the specific things that are required to keep them safe in their work.

Good luck to all safety instructors in getting the message across.  We hope the posters will help get the attention of your workers.  It’s also good to stock up on several and post different ones on a periodic basis, so employees will be watching for new ideas.

Share on Facebook

Today’s Guest Blog is from Joseph Morris at http://www.buy-pepper-spray-today.com.  Here are his thoughts on how we can stay safe at the workplace. 

Most of us take our jobs for granted. We wake up, go to work, get paid and go home. The thought of an accident or injury is not one that crosses most people’s minds. However, almost all jobs involve some sort of risk – be it large or small – and the awareness of these hazards, and the proper use of safety equipment, is critical to mitigating the incidence of injury on the job. 

One of the most important aspects of work safety is training and awareness. New employees, especially those in industries which involve heavy machinery, heavy lifting, chemicals, noise, repetitive movement and heights, need to be trained properly. It is critical that they understand how the equipment that they operate works and what the dangers in their work environment are. 

However, training and awareness are not enough. Any industry and its workers would benefit from using the correct occupational safety products. These products can help to protect workers from physical injury, improving productivity and employee confidence, while decreasing employer liability. Let’s discuss some of the most important occupational safety products. 

Hearing Protection 

The ears are designed to withstand sound pressure levels up to a certain point. After that point, however, hearing damage can occur. The damage may take place over a long period of time, or may have a rapid onset after sudden exposure to loud noise. Ears can be protected with ear muffs or earplugs.   

Ear muffs fit over the whole ear – they resemble large headphones.  Some ear muffs are adjustable; they can fit on any size of head. In certain industries, muffs which are made of dielectric materials – meaning that they are poor conductors of electricity – are important; they should not attract live currents to the workers head.  Some ear muffs offer special acoustic filters which provide an even attenuation of external noise, allowing the worker to hear everything around them at a reduced level, instead of muffling the sound, while protecting their hearing.  Ear muffs should be made of resilient material, be lightweight and allow the worker’s ears to breathe. 

Earplugs are much smaller than muffs. They fit directly in the ear, and are usually made of a pliable foam or silicone material. The advantages of plugs are that they are lightweight, easy to transport, inexpensive, discrete and easily replaced. Some workers may find them more comfortable than ear muffs. However, some earplugs do not offer sufficient attenuation of outside noise. It is important that the attenuation capabilities be compared with those of ear muffs. If the former cannot provide adequate hearing protection, then the latter must be chosen. 

Head Protection 

The skull protects the brain, and the head rests upon the neck. Injury to either one can have a serious impact on a person’s functioning and quality of life. Protecting the head on jobs where heavy objects in motion, and the risk of falling objects, are regular occurrences, is critically important. The “tried and true” method of protecting the head is the helmet. 

Helmets, most often referred to as “hard hats”, are made of hard, durable plastic, often high density polyethylene. Many hardhats include adjustable chin straps to ensure a snug fit. Inside, a suspension system evenly distributes the helmet’s weight over the head More recently, small sizes designed for women, children and men with smaller skulls have been made available, improving both worker compliance and confidence in the appearance of the hard hat. Hard hats should be made of a dielectric material, be able to withstand whichever impacts might take place within a given industry, and be resistant to chemicals which may be used on-site. Some hard hats include ventilation and attachment points for flashlights, radios and other tools. 

Work Gloves 

Virtually every activity we do, both on and off the job, involves our hands. Protecting the hands at work, from impact injuries, cuts, abrasions, caustic chemicals and repetitive stress, should be a priority. Work gloves help to keep the hands safe. Such gloves may range from the simple, rough leather style to more complex gloves, with elasticized cuffs, palm and finger grips, vent holes, knuckle reinforcements and flexible fabric. 

The characteristics found in the more complex gloves, such as the ones mentioned above, are an ideal choice for most work environments. They allow the worker to retain dexterity while protecting the hands from most injuries. Jobs which involve dangerous machinery or heavy items may dictate that  thicker gloves be used, sacrificing dexterity for the sake of protection. 

Ear muffs, earplugs and work gloves are not the only types of occupational safety products. Many others, including ergonomic office products, first aid products, protective clothing, respirators for environments with poor air quality, safety glasses, safety boots and shoes and lighting and communications systems, should be utilized when and where necessary. Remember, worker safety starts with training and awareness, and is completed by using the correct safety products.

Thank you, Joseph, for this great information regarding the important safety aspects of personal protective equipment and proper training in its use.

Share on Facebook

One of the most important things we can do for good health is to protect our lungs.  Smokers probably don’t want to think about it, but we should do everything possible to be able to breathe easily!  I looked up a few words that pertain to helping those with work exposure to respiratory hazards, and want to share what I learned.  Those who are involved probably already know all about the subject, but for those who don’t, bear with us. 

According to McGraw-Hill Science & Technology Dictionary, spirometry is the measurement, by a form of gas meter, (spirometer) of volumes of air that can be moved in or out of the lungs.  Spirometers are instruments used to test lung capacity; spirometry is the gold standard for diagnosing and monitoring the progression of C.O.P.D.  Spirometers can be stand-alone, diagnostic PC-based, or pocket-sized.  Chronic Obstructive Pulmonary Disease is the 4^th leading cause of death in the U.S., affecting more than five per cent of the adult U.S. population. 

Respiration, according to Briticannica Concise Encyclopedia, is the process of taking in air for oxygen and releasing it to dispose of carbon dioxide.  The amount of air inhaled and exhaled in an average human breath is about one-eighth the amount that can be inhaled after exhaling as much as possible.  Nerve centers in the brain regulate the movements of muscles of respiration (diaphragm and chest wall muscles).  Blood in the pulmonary circulation brings carbon dioxide from the tissues, to be exhaled and takes up oxygen from the air in the pulmonary alveoli to carry it to the heart and the rest of the body.  Because the body stores almost no oxygen, interruption of respiration – by asphyxiation, drowning, or chest muscle paralysis – for more than a minute can cause death. 

Spirometry Monitoring Technology

From the Centers for Disease Control, spirometry monitoring is recommended for persons with occupational exposure to respiratory hazards, and is best done as part of an overall health maintenance program in which results of spirometry evaluations are linked with exposure control, smoking cessation, and general health-promotion interventions. Spirometry monitoring should be done to prevent development of disabling chronic lung function impairment through early intervention on excessive lung function loss. Spirometry plays an important role in an occupational respiratory health surveillance program. It can assist the health professional by determining if a worker demonstrates a specific pattern of respiratory impairment and can help to assess the effectiveness of measures implemented to protect the individual worker. In addition, results from defined groups of workers can be evaluated in relation to potential workplace hazards.

Protecting the health of individual workers is a primary objective of various workplace surveillance programs. Results from an individual should be further assessed if abnormalities are detected or if pulmonary function values show an excessive decline in comparison to the individual’s previous tests. After ruling out technical causes for low or declining pulmonary function, efforts must be made to identify the cause. If the cause is related to a workplace exposure, then steps must be taken to better control or eliminate the exposure and prevent further damage to the worker’s lungs.

 NIOSH recommends the use of half-facepiece particulate respirators with N95 or better filters for airborne exposures to crystalline silica at concentrations less than or equal to 0.5 mg/m3. The Occu­pational Safety and Health Administration (OSHA) also specifies the use of at least a 95-rated filter efficiency [29 Code of Federal Regulations (CFR) 1910.134]. The recommendation for a 95-rated filter efficiency reflects the improved filter efficiency of N95 filters over the earlier dust and mist (DM) filters. A comprehensive respirator program must be instituted prior to the use of 42 CFR 84 respirators. The requirements for a comprehensive respirator program are included in the OSHA respiratory protection standard (29 CFR 1910.134).

Monday, September 26, 2011, National Mesothelioma Awareness Day 2011, carries special meaning, because mesothelioma is a relatively rare form of cancer that strikes as many as 3,000 Americans each year. A common cause of mesothelioma is asbestos exposure. Victims tend to be electricians, plumbers, contractors, or armed forces veterans – anyone who worked with or around asbestos. The condition develops decades after exposure, but the disease can prove fatal within a year of diagnosis. At present, there is no cure.  Sadly, family members also often fall prey to mesothelioma as a result of secondary exposure to asbestos fibers carried into the home by the primary victim.  That’s why it is very important for the worker to shower and change clothes before leaving the worksite. 

This article wasn’t meant to be “long-winded,” however, we want employers and employees to realize the importance of well-planned and executed programs for respiratory protection.  (After all, science lessons are very important!)

Share on Facebook

In the Northern Hemisphere, the first day of autumn, (or Autumnal Equinox) is Friday, September 23^rd.  The word equinox comes from the Latin words for “equal night.” The fall and spring equinoxes are the only days of the year in which the hours of day and night are equal as the Sun crosses the celestial equator.  From here on out, the temperatures begin to drop and the days start to get shorter. The four seasons are determined by changing sunlight (not heat)—which is determined by how our planet orbits the Sun and the tilt of its axis.

As days begin to cool off, chances are you will be in the mood to get out there and do some of the tasks required to prepare your yard for winter.  Raking leaves is usually one of the big jobs waiting for you.  Be sure you own a good rake and a good pair of work gloves.  When picking up the leaves, bend at the knees, not the waist, or you’ll have a sore back.  As the weather becomes cooler, certain allergens blow in, just the same as in the spring.  A dust mask will help when you are working outdoors.  Watch for snakes lurking under the leaves! 

More than 400,000 victims of lawn and garden tool accidents are treated in U.S. emergency rooms annually, according to the U.S. Consumer Product Safety Commission.  Always wear safety glasses when doing yard work, as well as earplugs, if you are working with power tools.  Be sure you use the correct tool for each job.   If you have to use a ladder to prune trees or clean out gutters, be sure the ladder is in good condition, and set it on level space.  Move it more often as needed rather than stretch to reach something.  Many falls are attributed to faulty ladders, so it’s important to have a sturdy one.

Following the extremely hot and dry weather that many areas in the U.S. have struggled with this summer, it would probably be hard to find anyone that isn’t looking forward to the fall season.  Watching the leaves turn, taking walks on cool mornings, and enjoying the wind-up of baseball season – leading to the World Series, as well as backing your favorite college and professional football teams, should furnish pleasure to everyone. 

One other word of caution: deer are out and about more during the fall season, so please be sure to keep a watch out for them.  Many times, they get spooked and run across highways without fear of cars.  This can be a dangerous situation for drivers and passengers, as well as the animals.  So, please use caution when driving. 

Fall is such a great time of the year – make it a safe one, and enjoy!

Share on Facebook

An important September observance in the United States is National Farm Safety Week, sponsored by the National Education Center for Agricultural Safety.  Working in the agricultural field ranks among the most hazardous industries in our country.  Farmers and family members who work side by side are at high risk for fatal and non-fatal injuries.  Most farmers have made their living by working the soil generation after generation.  They are aware of the hazards their occupation presents.  Accidents happen, though, and we want to share with you some of the things that might happen on a farm or ranch. 

Every day, approximately 243 agricultural workers suffer lost-time injuries, according to the National Institute for Occupational Safety and Health, (NIOSH).  Young people are particularly susceptible to injury, if precautions are not taken.  Many young persons are injured by machinery (including tractors) and motor vehicles (including ATV’s).  

• PTO’s (power take-off) devices are extremely dangerous to workers, especially children.  These are pieces of farm equipment, such as augers, that are attached to tractors.  They rotate at 540 to 1,000 revolutions per minute.  Loose clothing could get caught in one of these, and there is simply no time to get out of this situation without serious injury.  
• Tractors should be equipped with a rollover protective structure (ROPS.)  There should not be extra riders on tractors or other farm equipment.  The person driving the tractor should always use handholds and care when getting on or off the tractor; slips and falls cause injuries.  A friend of ours who has farmed all of his life fell off his tractor one day, breaking his collarbone.  
• ATV’s are very popular on farms and ranches; they are designed for a single rider.  There is a risk of overturn when riding an ATV.  Always wear appropriate personal protective equipment (PPE) when operating machinery, such as a helmet when riding an ATV. 
• Animals present certain obstacles, as most farmers and ranchers will tell you.  Avoid quick movements and loud noises when working with animals.  One should know their characteristics.  Movement in an animal’s blind spots may startle it.  Be sure there is a quick escape if you go inside an animal pen.  The same goes for having a good escape route when working with animals in close quarters, such as chutes and stalls. 
• Hired farm workers should be aware of farm safety; they should have training and direct communication to ensure that they understand what they are expected to do.  Direct supervision when they are performing dangerous duties, particularly when the worker is new to the job.  Be sure there are no language barriers limiting the effectiveness of training or supervision. 

There are many other obstacles included in farm work.  Pesticide exposure could cause pulmonary disease.  Hearing loss from operating loud equipment over a long period of time, stress, and musculoskeletal disorders may result from this occupation.  The use of personal protective equipment is important when working outdoors.  Safety sunglasses, good work gloves, and respirators for working in dry, dusty environments are just part of the necessary protective measures to use. One never knows when that first aid kit will be needed, either. 

As always, we salute those who work in the agricultural field.  Without them, we’d be pretty hungry!  We wish for safety for all of them; and empathize with those who have lost their crops this year due to drought, flooding, wildfires, or other natural disasters.

Share on Facebook

Wildfires continue to make their way through the state of Texas, and the firefighters, both volunteers, professionals, and other firefighters from all over the United States are doing their best to contain them.  Thousands of persons have been left homeless, having been left with only the clothes on their backs.  The brave personnel who have been fighting wildfire after wildfire must be totally exhausted, but they keep going back to answer the calls for help. 

Workers are exposed to many obstacles, such as electrical hazards, carbon monoxide poisoning, lifting, extreme heat, respiratory problems, snakes, rodents and insects, and slips, trips and falls.  They also must bear the extreme weight of the protective clothing that they wear.  Depending upon the site’s job tasks, listed are some of the personal protective equipment that they must use:

• Disposable cut/abrasive resistant work gloves.
• Chemical gloves.
• Fully enclosed goggles (best for ash) or safety glasses.
• Ear protection in noisy areas.
• Head protection.
• Respirators. 

Fire fighters must be medically cleared to wear the correct respirator.  Other instructions per OSHA standard (29 CFR 1910.134), include:

• Proper training.
• Fit testing for respirator.
• Inspect respirator each time it is put on and taken off.
• Perform a user seal check every time it is donned.
• Clean the elastomeric respirator at least once a day in accordance with manufacturers recommendations.
• Store elastomeric respirators in a clean bag.
• Stop work and retrieve a new one should the respirator become damaged or fail to function. 

Firefighters are also exposed to the fire retardants that are dropped by planes.  Desperate measures are demanded to try to extinguish or control the strength that these fires contain because of the extreme drought for the past eleven months of this year in the state.   So far, approximately 1,600 homes have been lost, (the count changes daily), and more than 3.7 million acres have burned.  Firefighters have saved countless homes.  Four persons have died as a result of the fires. 

Once the fire is over, firefighters and other workers may be involved in a variety of response and recovery operations.  Some, such as utility restoration, cleaning up spills of hazardous materials, and search and rescue, should only be conducted by workers who have the proper training, equipment and experience.  Because of demand, many other community volunteers will be involved with cleanup, and should take the same precautions as trained workers.

Please think positive and say a prayer for rain for those parts of our country that so desperately need it.  There are some states who have had too much rain, so it seems to be “feast or famine” where the weather is concerned.  The words “Thank You” cannot express the gratitude we owe our firefighters everywhere, every day – men and women who work so diligently to save homes, people, wildlife and land. 

Source: OSHA, NIEHS, NIH

Share on Facebook

While working with a flood cleanup crew in Minot, North Dakota, a quality assessment representative for the town was watching a private business owner and contractor assemble a group of workers to enter a grain storage bin.  Noting that there was no safety equipment present, and knowing the hazards involved,  the representative from Minot called an OSHA inspector in the area, who quickly arrived on the scene.  There was no retrieval gear for the workers, the atmosphere had not been tested, and no training in grain bin entry had been given to the workers.  Due to this intervention, a potential tragedy was prevented. 

Unfortunately, a terrible accident in Colorado in 2009, did not have the same results.  A 17-year-old worker lost his life in a grain bin.  The company pled guilty to violating OSHA regulations that resulted in the death of this young man.  There was a lack of safety and rescue equipment on site; however,  three teenagers entered the bins without the benefit of personal protective equipment, such as a body harness and lanyard.  The only instructions given to the crew were to watch out for one another and be careful.  Cody, the victim, was allowed to enter the bin despite knowing that the bucket elevator was not locked out and grain was flowing from the bin.  While inside the bin, he was engulfed by the flowing grain and sucked under, where his chest was crushed and he died of asphyxiation.  Despite the efforts of Cody’s co-workers, they were unable to locate and rescue him.  

The facts of the investigation revealed  that it was common practice for this company to hire high school-age teenagers from the local area.  These teens were assigned various hazardous tasks, which included bin entry, “Walking the Grain”, working in and around unguarded mechanical equipment, unsafe electrical devices, confined spaces, and exposure to explosive grain dust.  Employees regularly entered the bins to “walk down grain”, the practice of walking around the edge of a bin to dislodge clumps of grain while it was flowing from the bin, without the appropriate safety harness with lanyard.  A center-grain-unloading auger draws grain from the top center and the grain forms a cone as the bin is emptied. 

There are many deadly hazards of engulfment and suffocation while working inside grain storage bins.  Grain bins are used to store bulk raw agricultural commodities such as wheat, corn, and oats.  If workers stand on moving or flowing grain, it can be like “quicksand” and pull them under.  If they stand on or below “bridged” grain, it can collapse and bury workers.  Also, if they try to loosen grain, it can cave in on them.  OSHA’s Hazard Alert warns how workers can become engulfed in these bins, and lists precautions that employers must take to protect workers.  These include:

• Disconnecting equipment that presents a danger;
• Prohibiting workers from walking on the grain to make it flow;
• Providing workers with personal protective and rescue equipment;
• Requiring an observer outside the bin who is trained on how to perform rescue operations. 

In the case of the teenager who lost his life, the company paid $500,000 to his family, as well as fines to OSHA.  OSHA Assistant Secretary David Michaels stated, “This is a terrible tragedy that should never have happened.  Money won’t bring back this young man’s life, but we can make every effort to ensure that these tragedies don’t happen again.”  The company involved is required to implement safety provisions that include providing safety training and refresher training to its employees, and develop a procedure that includes harnesses and lanyards or similar safety equipment in anticipation of bin entry at any of its grain elevators.  If they violate any of these terms of probabion, they could be potentially liable for up to another $500,000 fine.

Parents: don’t hesitate to find out what kind of job your teenager is going to be asked to do.  It’s not worth taking a chance.  Companies should never gamble with their employees’ lives, especially when they put them in hazardous situations that are entirely preventable. 

Source: OSHA

Share on Facebook

Today’s article was sent to us by Guest Author, Rachel Jones of mesotheliomasymptoms.com.  She had expressed an interest in sharing ways of protection for contractors who work around asbestos . 

On September 26, the eighth annual Mesothelioma Awareness Day will take place in the United States. Congress has set aside this time to help raise both awareness and funding related to this deadly cancer that still affects up to 3,000 new patients a year. With direct linking to asbestos exposure, the tie between this cancer and safety gear is crucial, especially with those involved in the asbestos abatement process.

There is an extensive amount of protective gear that is required to keep workers and abatement professionals safe from the dangers of asbestos exposure. Some of the common examples of protective gear aren’t nearly as capable of preventing these dangerous levels of exposure from occurring. For example, a common safety mask made out of paper is unable to protect from the inhalation of these fibers.

Mesothelioma is a cancer in which the lining (mesothelium) of the lungs, abdomen and heart can become compromised by asbestos. Because the lungs are highly susceptible to being affected by asbestos fibers, a respirator is probably the single most important type of protective gear to abatement contractors.  Dual cartridge respirators which serve to cover half of the face are the most common type used. It’s also greatly imperative that they include HEPA filters with a NIOSH rating of N100, P100, or R100. This means that the filters are small enough to prevent asbestos fibers from being inhaled. Just as is the case with any necessary respirator use, the fit of the gear is crucial, as an ill-fitting mask would be unable to prevent from all leaks.

Along with the importance of respirators, there is a great need to protect both the skin and eyes when contact with asbestos is taking place. Just as is the case with most construction projects, safety goggles or other protective eyewear is highly recommended. Protecting the skin is a much more complicated process, however.

Some states vary on the advised protective and safety gear from a clothing standpoint, while most recommend that disposable coveralls and gloves are the best option. A few states even suggest wearing multiple sets of coveralls. In any case, the protective clothing worn during the process of asbestos abatement must always be disposed in a sealed asbestos waste bag.

This great amount of safety and protection is a major necessity. While many remain uninformed and unaware of the dangers of this cancer, it has posed a threat to industrial workers and others for decades. Even though the use of asbestos as a common material has largely decreased in the last few decades, the long latency period of mesothelioma will ensure its affect on people for years to come.

This latency period involves a large gap (often decades long) between an original exposure to asbestos and the onset of symptoms. With extremely long gaps between exposure and the arrival of symptoms, mesothelioma life expectancy is on average, very low (between four and 18 months after a diagnosis).

With the dangers of asbestos exposure and mesothelioma set to have a major affect into the future, the importance of proper safety gear and awareness of this disease go hand in hand. Just as staying informed on the dangers of asbestos exposure can help future patients, proper safety gear will allow contractors to keep safe in the process of having asbestos removed.

Thank you, Rachel, for this very informative article.  Hopefully, those who are working around buildings containing asbestos will take all the necessary precautions to stay protected and healthy.  You can find more interesting articles about mesothelioma at the website: www.mesotheliomasymptoms.com.

Share on Facebook